View and share pictures here of the 2022+ Toyota GR86 in Pavement Gray
Pavement Gray 2022+ Toyota GR86 Pictures
Admin
81 - 100 of 264 Posts
Joined
·
672 Posts
TRD GR AERO STABILIZING COVER FOR TOYOTA 86 ZN8 MS346-18002
Brand TRD Series Name GR AERO STABILIZING COVER Product Number MS346-18002 Compatible Car TOYOTA 86 ZN8 Product Description It fills the step between the rear glass and the boot lid and rectifies the air flowing to the boot. Improves the aerodynamic performance of the trunk spoiler. Notes Images...
www.blackhawkjapan.com
I got it here. Came out to $193 shipped. Not cheap, but cheaper than most of the other places selling it.
Joined
·
672 Posts
The instructions where all in Japanese so I just winged it. I think the proper installation it should be a bit further up with a larger gap based on the pictures online, but I thought this looked better to be more flush and it still seems to drain fine.
Fuuuck gaah I let it rip. It's on the way [emoji51]TRD GR AERO STABILIZING COVER FOR TOYOTA 86 ZN8 MS346-18002
Brand TRD Series Name GR AERO STABILIZING COVER Product Number MS346-18002 Compatible Car TOYOTA 86 ZN8 Product Description It fills the step between the rear glass and the boot lid and rectifies the air flowing to the boot. Improves the aerodynamic performance of the trunk spoiler. Notes Images...
I got it here. Came out to $193 shipped. Not cheap, but cheaper than most of the other places selling it.
Sent from my Pixel 5a using Tapatalk
Joined
·
81 Posts
Since the previous post I have added the red mirror caps and wrapped the antenna pod with red. The Vivid Ultra Gloss Racing Red is a perfect match to the Subaru red mirror caps. Just having a little fun with the GR86!
I'm going with a little more subtle look on the mirror caps. They're ready to install, so I have to get off my ass and do it.....
You doing a silver to match the wheels?
It’s been 3 weeks and so far I’ve done the LED swap out, the cheap exhaust tip solution, tinted my side markers and rear signals and added the Factionfab wheel spacers. (20mm front and 25mm rear)
![Image]()
![Image]()
![Image]()
Attachments
Joined
·
81 Posts
picked her up yesterday, added clear sidemarkers, all LED lightings, gr aero, grimmspead tower brace, spare tire from ebay, washed and waxed.
20mm and 25 mm spacers, hks exhaust, mtech clutch spring, billetworkz short shifter, door stabilzers all still in living room floor waiting to be installed.
what a fun ride so far 😍
![Image]()
![Image]()
![Image]()
![Image]()
20mm and 25 mm spacers, hks exhaust, mtech clutch spring, billetworkz short shifter, door stabilzers all still in living room floor waiting to be installed.
what a fun ride so far 😍
Joined
·
81 Posts
ceramic tint coming soon
Joined
·
81 Posts
key fob tip,
came with 2 key fobs. u can keep the spare key fob from transmitting signal by holding down lock then pushing unlock twice, light will blink on key fob. now u can store spare away and battery will last. to undo, just click unlock. 👍
came with 2 key fobs. u can keep the spare key fob from transmitting signal by holding down lock then pushing unlock twice, light will blink on key fob. now u can store spare away and battery will last. to undo, just click unlock. 👍
Joined
·
81 Posts
door stabilzers and mtec clutch spring installed, clutch is now a lil bit heavier clutch bite point can easily be felt now. mtec clutch spring removal and install was easy, less than 10 minutes to do.
need to install wheel spacers and exhaust next
![Image]()
![Image]()
![Image]()
need to install wheel spacers and exhaust next
Joined
·
81 Posts
to stiffen the door supposedly, check it out on youtube
Joined
·
81 Posts
20 mm spacers front and 25mm rears installed, looks alot better now, i’ll take pics tomo, got dark finishing up today.
![Image]()
Joined
·
81 Posts
car looks great and drives awesome
![Image]()
81 - 100 of 264 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
