Toyota GR86 Forum - GT86 Forum, Subaru BRZ Forum, Scion ... banner
1 - 20 of 23 Posts

· Vendor
Joined
·
87 Posts
Discussion Starter · #1 · (Edited)



Rumble v2.4. Presenting the AWE Exhaust Suite for the Subaru BRZ and Toyota 86:




Overview:

  • Proudly engineered, designed, and manufactured in-house at AWE, in the USA
  • Deep, aggressive BOXER® tone
  • Available as Touring or Track Edition Catback Exhausts
  • Touring Edition features AWE’s patented drone-canceling solution, 180 Technology®
  • 5” double-walled, slash-cut available in chrome silver or diamond black
  • Handcrafted from 3” & 2.5” CNC mandrel-bent, U.S.-sourced .065” wall T304L stainless steel
  • Direct bolt-on for factory-like simplicity
  • Max gains of 2 hp and 1 lb-ft of torque at the wheels
  • Conversion Kits available - easily switch between editions
  • Less is more: clean, straight-through design maximizes flow
  • Perfect fitment, guaranteed
  • AWE No Check Engine Light Guarantee
  • Lifetime warranty

The Options:




Touring Edition Exhaust:






The Touring Edition Catback is for drivers who like their BOXER rumble to be deep, hearty, and full of crackles all without any interior drone at cruising speeds. Comprised of 3” and 2.5” T304L stainless steel with a hefty wall thickness of .065”, the Touring Edition features a bullet-style resonator in the mid-pipe and a set of patented 180 Technology® resonators residing in the rear to decimate any drone-prone frequencies from the exhaust note while keeping the flow of power uninterrupted. Thanks to the design and construction of 180 Technology® resonators, the internals will not break down and degrade over time causing tone change. Full-bodied rumble for life from the point of installation.





This configuration provides the best ratio of interior refinement and exterior rumble on the market.


Perfect tone, compliments of AWE 180 Technology®.





As exhaust gases exit the engine and flow into an AWE 180 Technology® equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.


Track Edition Exhaust:






For those looking to crank it to 11 with no intention of turning it down, Track Edition is your dose of steel.





The Track Edition retains all of the precision engineering from the Touring Edition, and the bullet-style resonator in the mid-pipe, minus AWE’s drone-canceling 180 Technology® resonators in the rear. The result? FA24 rumble with minimal filter, both in and out of the cabin, at all speeds.





This version is known to get rowdy, and may be too much for many. For that reason, this particular version cannot be returned due to sound preference. Prepare yourself.


Conversion Kits:


We made it easy to convert from a Track Edition to a Touring Edition, or vice versa, if you decide at a later date to turn it up, or turn it down.






Tip Options:


All tip options include the AWE logo and double-walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste.

  • 5” slash-cut chrome silver tips
  • 5” slash-cut diamond black tips







What’s in the box?


Complete Touring or Track Edition Exhaust, two 5” double-walled slash-cut tips in chosen finish, and all necessary hardware for installation.





 

· Registered
Joined
·
284 Posts
Tips need to come out about another half inch.
From the first post-
"All tip options include the AWE logo and double-walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste."
 

· Vendor
Joined
·
87 Posts
Discussion Starter · #9 ·
Tips need to come out about another half inch.
From the first post-
"All tip options include the AWE logo and double-walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste."
You got it, they have a lot of depth adjustability so you can set them exactly where you want.

I actually did the install on these and that is where I like em personally, but if you wanna see more of the logo we are not mad about it! :cool:
 

· Vendor
Joined
·
87 Posts
Discussion Starter · #11 ·
Dont take it personally, i find a lot of exhausts for this platform to sound like that. My first gen i love the sound of the Corsa but it is heavy and does hang down lower than stock which sucks. There's no perfect system out there
I hear ya, we do a ton more sound testing than some others, and tweak it until its to our liking. It's tough to get that perfection, but we think we came pretty darn close!
 

· Registered
23 Neptune GR86 PMT
Joined
·
183 Posts
I'm also very interested in sound measurements for the touring.
 
  • Like
Reactions: Morgan

· Vendor
Joined
·
87 Posts
Discussion Starter · #15 ·
So what part of the pipes are 3" and what parts are 2.5"? I am assuming the main pipe is 3" and the pipes after the branch to the dual pipes are 2.5"?
Correct, after the inlet to mate to the factory piping, the system is 3" until it leaves the rear resonators, the last pipe from the resonator to the tips are 2.5".

Those are also the same pieces from Track to Touring.

Automotive lighting Product Automotive design Automotive exterior Automotive exhaust
 

· Vendor
Joined
·
87 Posts
Discussion Starter · #18 ·
Excited to see you guys join! Hope to see more from you guys!

I ordered a Track Edition on Friday. Just wondering what the ETA is looking like ATM.
We had a limited quantity made in preparation for the release, if your system wasn't one of those, lead time is currently 4-6 weeks.

DM me your order number (or name and email if you don't have it handy) and I can get you an answer on your specific order.
 

· Vendor
Joined
·
87 Posts
Discussion Starter · #19 ·
For those asking about decibel testing;

We performed the SAE J149 standard to test dB. the BRZ tested at 96 dB during that test. This is on par with what we would expect from any aftermarket exhaust system.

Keep in mind that if the parameters are anything but the SAE standard, that the number can be different.
 
1 - 20 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top