Search Results for ‘suspension’

Hey guy's was wondering if i would be able to buy the GROW springs and it would work perfectly fine with stock damps my goal for this car is pure canyon runs with only a slight drop in height since i already have a full HKS body kit and don't want clearance issues but with the benefit of the...

If anyone has ran a similar or exact setup and had any fitment issues? i was also wondering what this would look like lowered to a two finger gap.

Hi everyone, as the title says I jumped a curb going about 25mph and damaged two wheels/tires and a bunch of suspension parts, see full list in the pdf. The car only has 1,061 miles on it so I had just broken the engine in. I had it towed to a Chicagoland Toyota dealership’s collision center who...

Hey all. I have a set of 17x9+38 wheels with 245/40 tires. So far, it's been 50/50 on whether I need RLCA or not. Anyway, I started looking at a couple options and I was wondering what the differences were between the cheaper and more expensive options: SPC - $147 ISC - $475 Cusco - $517 SPL -...

Wanted to take a moment to share my experience so far with the sway bars I installed over the weekend. Currently, my GR sits on Tein H-Tech springs and has SPC camber bolts in the front with the bottom bolt moved to the top hole. Currently only running -1.5* of camber in the front, but this...

Im looking for new coilovers and I think I've narrowed my search down to either the Superstreet 1s from RCE or Fortune Auto 500s, I was hoping some of the community could give me some more insight on the pros/cons or just the differences between the 2. Some background is I use the car for daily...

Hello guys! I'm starting to look into some coilovers, front and rear strut bars, as well as control arms set. I just saw some videos on these different parts and heard they'd be a pretty good place to start more upgrades with. I currently have: Exhaust: AWE touring Sidemarkers: White ones...

I am ordering Enkei T6R wheels for my car. Their offset is +45 which is nearly the stock wheels offset of +48 if the internet is to be believed. I'm looking to get my wheels flush with the fender and from my research, +35 is the magic number. This means I will have to run 10mm spacers in order...

Hi, I am planning to change my stock rims to Enkei RS05RRs. However, after asking most dealers around me, the best options I found were a staggered setup with 18 x 8.5j et42 for the front, 18 x 9.5j et43 for the rear. The dealer told me that this is the flush setup for GT86, but I'm wondering if...

Having installed a 2" ADF lift kit its a great look and clearance is much better for road hazards and undesirable sometimes unavoidable road transitions here in Seattle Tacoma. The front end of kit seems ok so far. BUT I have big problems in the rear. 1. There's no good way to hook up the...

So im getting new wheels in the spec in the title, im looking at getting Fortune auto Coilovers as well. I don't know what tires ill be running, but what else would i need to make this set up work without cutting the fenders? Feed back will be much appreciated

Hi! So i dont know much about this stuff as my GR86 (Track bRed) is my 2nd ever car and the only one ive even thought about modifying. so basically im planning to get 245/40 17x9 +42 wheels and tires and i dont really want any rubbing issues so i was going to stick with stock suspension system...

Are you looking to upgrade your car's suspension and improve its handling and performance? SPL Parts is your go-to for premium suspension components that will transform your ride. They offer a wide range of high-quality suspension parts including control arms, end links, bushings (and much more)...

We've been working with Fortune Auto for almost 10 years now. Our shop BRZ has been running a 1'' longer set to deal with our winters here, still running strong after years and can't say enough about the ride quality, especially for daily driving. We have 4 options for the new GR 86, all...

Hey all, just curious if anybody had installed aftermarket sway bars on stock suspension? If so what brand, thickness, and front-end links? How significant was the change in both performance and ride quality? I don't want to go too big but I also don't want to go too small. Thanks

Hi all, I've just gotten an alignment done after swapping to some Tien Flex As. Here were the results: That's a fairly significant difference in the rear. Has anyone else experienced this? No damage to suspension components at all. No RUCA or RLCA. I measured the exposed barrels on the...

Hey all, I was really considering getting new sway bars. For reference, my car has stock suspension and the only other modifications I have done to it are a Greddy EVO GT exhaust and a grimspeed suction hose. I was wondering if a few of you with experience with aftermarket sway bars could tell...

Hi! Wanted to talk about an interesting set of coilovers I have put on my gr86. Tanabe Revel Touring Sport Damper is the official name, definitely a mouthful. Running mxp exhaust and have about 4-4.3” of ground clearance roughly. They have made the ride more direct and engaging. Enhancing road...

Hello, Hope everyone is doing great! I have some questions when it comes to the REAR FENDER / QUARTER PANEL shaving. It looks like is the only way around some of the most popular fitment for our cars and if you're tracking it then is a no brainer to do it but I was just wondering about chassis...

Hello, This was my first time ordering coilovers for a car so I'm lacking a bit of experience in this department and I have some questions about the situation I'm in. I ordered some Ohlins for my 86 because it was from my understanding that all gen 1 coils swap right over to the gen 2. There...